Solution Description

KY-200KYG Air Compressor (can be custom-made) :

Basic Characteristics:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or substitution, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building materials, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption tools, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
Special Functions:
1,AIR Strain STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
two,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This impact is not only on the grid, the affect of the total mechanical system, but also tremendously diminished.
3,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
four,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the era of electricity, frequeucy conversion push can display its advantages.
5,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the fan is also driven by frequency conversion, can drastically lessen the nosie of air compressor perform.

Complex PARAMETERS:

Energy-SAVING EFFECT OF TWO-STAGE COMPRESSION:

According to the engineering thermodynamics theory, it is the most cost-effective for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Strength-conserving benefits:
1,To lessen the bearing load, and improve the volumetric efficincy
2,In the scenario of partial load procedure, it can enhance effectiveness and grow to be CZPT preserving to a better extent.
3,The energy saving of two-stage screw air compressor is up to 15%-twenty five% than that of the one-stage air compressor, which can save the considerable electricity fees every year.

About shipping and delivery

Company information

Why choose us?

 

Certificate

FAQ:

1.Q:What do you need machine and quotation?

A: According to capacity and factory size ,we can give you details.

2.Q: Are you investing firm or maker ?

A:We are factory.

3.Q:How do we pack machine?

  A:Exporting wooden cases

four.Q:Lead time

A:Around 25-30 days after the receipt of your deposit.

 

Sorts of Air Compressors

There are several types of Air Compressors obtainable on the market place. Find out which 1 is appropriate for your requirements and what can make one far better than one more. Find out a lot more about Single-phase designs, Oil-free types, and Reduced-noise versions. This write-up will describe these types and help you choose which 1 you need. You can also find out about Air Compressors that have single-stage compressors. If you are hunting for a higher-top quality compressor, this write-up will assist you select a unit.

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder by means of an exhaust valve. 1 of the most frequent varieties of air compressor is the reciprocating variety. Yet another type of compressor is a single-stage piston. These sorts of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These products alter electrical or mechanical vitality into pressurized air. When air is compressed, its quantity decreases, escalating its stress. Air compressors generally have a minimum stress of 30 bars. The reduced pressure band is the range of air stress. Most compressors are controlled individually, but network controls can be used to interconnect multiple compressors. This type of controller will not perform for all kinds of compressors. There are other types of air compressors that can connect with each and every other.
Compressed air has numerous apps in all types of industries. In agriculture, it can power pneumatically driven materials handling equipment for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also utilized in the pharmaceutical business for mixing tanks, packaging, and conveyor techniques. Portable air compressors, which can be driven by diesel fuel, are frequently employed at distant drilling internet sites. Moveable air compressors are also generally used in oil and gasoline. They can be utilized to remotely control valves and set up reactor rods.
Whether you use an air compressor for agricultural functions or in a manufacturing environment, there are some characteristics to contemplate when selecting an air compressor for your demands. A excellent compressor will have a protection device. It will instantly shut off the input air and output air when ample compressing has been attained. These attributes will aid your air compressor stay effective and safeguard your gear. The safety unit is an important attribute of any air compressor to increase its total efficiency.
Vane air compressors are the most common kind. They are normally more compact and much less potent than reciprocating piston compressors, so you can use one of these for applications that are under a hundred horsepower. The vane air compressors have lower compression ratios and higher capacities, but they are typically restricted to minimal-electricity purposes. Vane compressors have a tendency to operate scorching, and they generally have a minimal compression ratio. It is important to decide on the correct oil viscosity for your compressor.

Solitary-phase models

When evaluating one-stage air compressors, look for the term “phases.” Multi-stage compressors use two stages and can manage a lot more potential and pressure. One stage entails pressurizing air employing a piston and a reduce-pressure cylinder. This compressed air is then moved to a storage tank. Solitary-stage designs are inclined to be much more power-successful than their two-stage counterparts. But if you do not need a large-stress cylinder, a solitary-stage air compressor can be the very best selection.
Though single-phase air compressors create significantly less power, they can make enough air to energy pneumatic instruments and other pneumatic equipment. These solitary-stage models are most valuable for smaller sized-scale home projects and Diy projects. For much more industrial reasons, a dual-phase product is the very best decision. But if you’re in a hurry, a one-phase device may be adequate. In the long run, it is dependent on what you strategy to do with the air compressor.
One-phase air compressors feature a one cylinder, one particular piston stroke for every revolution of pressurized air. Solitary-phase compressors are typically scaled-down and a lot more compact, making them a good selection for scaled-down perform environments. Their cfm ability (cubic feet for every moment) is an important indicator of running capacity. If you prepare to use a number of pneumatic tools, you will most likely need a increased cfm design. Likewise, the horsepower of one-phase compressors indicates its doing work capacity. A single horsepower moves 550 kilos for each foot for every minute.
Multi-phase air compressors are typically more high-priced and far more strength-efficient than one-stage units, but they can offer increased air movement rates. Whilst they could be a lot more sophisticated, they can reduce basic operating expenses. If you plan on using your air compressor for industrial or industrial use, a dual-phase model may well be the ideal option. Nevertheless, if you are preparing to use the air compressor for mass generation, a solitary-stage design may possibly be the very best option.
Single-phase air compressors have the exact same piston dimension and quantity of inlets, even though dual-phase models have a more compact first piston and a a lot longer 2nd piston. Both have a cooling tube in amongst the two pistons to decrease the air temperature before the next spherical of compression. The one-phase model is typically small and transportable, although the double-stage air compressor is stationary. These compressors can the two be stationary and huge.

Minimal-noise models

Despite its title, lower-noise designs of air compressors are not all the very same. The sound stage of a compressor can be afflicted by a number of factors, including the electrical power supply and proximity to the equipment. Reciprocal compressors are normally louder than electric powered types since of their several moving parts. By distinction, rotary-screw and scroll compressors have fewer moving components and are quieter.
The sounds degree of a gasoline-driven air compressor can be extremely large, generating it unsuitable for use indoors. To battle this dilemma, you can choose an electric powered design. The sound degree of a compressor is primarily induced by motor friction. The protect of a piston is also a main aspect in sound, as pistons with minimum addresses will create a good deal of noise. Formerly, oil was required for a peaceful compressor. Even so, this has changed many thanks to the health-related industry’s demand for oil-cost-free types.
The CZPT EC28M Tranquil Air Compressor is an additional model that attributes tranquil operation. This air compressor helps make 59dB of sound. This amount is reduced ample to allow you to have on standard discussions although it cycles. In addition, this compressor has an industrial oil-totally free pump and a 2.8 Amp immediate-drive induction motor. These two features make it a great decision for businesses.
Minimal-noise versions of air compressors are obtainable for the design market. Even so, these compressors are not necessarily lower-good quality, which is why you ought to think about the noise level of your air instrument before purchasing one particular. The specialists at CZPT can advise the lower-noise models for your distinct application and place. Sound can distract folks who work in close proximity to the air compressor. That is why numerous companies now choose for these models.

Oil-totally free models

A number of oil-free designs of air compressors are offered, but what tends to make them specific? Oil-free compressors do not incorporate oil, so they are lubricated by grease as an alternative. They are a excellent option if you happen to be doing work with a modest compressor and will not want to risk damaging it. On the other hand, oil-free of charge models do create important amounts of heat, which can damage the compressor. Increased strain can grind the compressor in opposition to itself, or even warp it.
A handful of phrases of understanding can support you pick the ideal oil-free of charge air compressor for your wants. For illustration, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower indicates a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technological innovation is a modern air compression method that uses a stationary and cell spiral. This minimizes the quantity of air in the compressor by directing it to the centre.
Purchasing an oil-free of charge air compressor isn’t going to have to be a complicated job, though. A great distributor can suggest you on what type of oil-cost-free air compressor is appropriate for you. This way, you can save income and enjoy peace of head although using your air compressor. And, of training course, the greatest way to get a great deal on an air compressor is to communicate to a distributor who is experienced about the items offered.
An oil-totally free air compressor is a wonderful option for firms that are delicate to the contamination of air. For example, in the pharmaceutical and meals business, a minuscule oil could spoil a merchandise or even hurt generation products. Oil-totally free air compressors normally have reduce upkeep costs than oil-flooded types due to the fact there are fewer relocating areas. Due to the fact of this, oilless air compressors demand much less maintenance and may nonetheless require to be changed occasionally.
A few positive aspects of an oil-free of charge air compressor above an oil-lubricated one include reduce noise ranges. Oil-totally free air compressors tend to be considerably less noisy and run far more quietly than oil-injected types, but you should even now carefully weigh the execs and negatives ahead of making a determination. Also, contemplate how much you use your air compressor just before picking a design. The pros outweigh the downsides. In the end, you may be happy you chose an oil-cost-free air compressor.